REMOVAL
Removal / installation · Vehicles built from Oct 2014
| 1. REMOVE ENGINE UNDER COVER NO.1 (w/ Engine Under Cover No.1) |
Remove the 7 bolts and engine under cover No.1.
| 2. SEPARATE VANE PUMP OIL RESERVOIR ASSEMBLY |
Remove the 2 bolts. Separate the vane pump oil reservoir assembly.

| 3. DISCONNECT OIL RETURN HOSE (w/ Intercooler) |
Loosen the clip.

Disconnect the oil return hose from the intake manifold.
| 4. REMOVE EGR PIPE SUB-ASSEMBLY NO.1 (w/ EGR Valve) |
Disconnect the fuel pressure sensor connector.

Remove the 2 bolts, 2 nuts, and the EGR pipe sub-assembly.

Remove the 2 gaskets.
| 5. REMOVE AIR HOSE NO.4 |
Loosen the 2 clamps.

Remove the air hose No.4.
| 6. REMOVE DIESEL THROTTLE BODY ASSEMBLY |
Disconnect the 2 throttle body connectors.

Remove the 2 bolts, 2 nuts, and the diesel throttle body assembly.

Remove the gasket from intake air connector.
