2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Jan 2015 – Mar 2016

Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. INSTALL NO. 2 ECM BRACKET
  1. Install the No. 2 ECM bracket with the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }


2. INSTALL NO. 1 ECM BRACKET
  1. Install the No. 1 ECM bracket with the 3 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }


3. INSTALL ECM

  1. A341615
    Install the ECM, connect the 2 ECM connectors and lower the 2 levers.

    NOTICE:
    1. When connecting the ECM connector, make sure that dirt, water and other foreign matter is not stuck between the ECM connector and ECM.
    2. Make sure that the 2 levers are securely lowered.

  1. Install the 3 bolts to the ECM.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }

    NOTICE:
    Do not use an ECM that has been dropped or subjected to a strong impact.

  1. Return the floor carpet to its original position.


4. INSTALL FRONT SEAT ASSEMBLY RH
(Click here)

5. INSTALL FRONT DOOR SCUFF PLATE RH

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


7. INSTALL BATTERY SERVICE HOLE COVER

8. PERFORM REGISTRATION
(Click here)
← INSTALLATION (Oct 2014 – Dec 2014)INSTALLATION (Apr 2016 – Dec 2016) →