REMOVAL
Removal / installation · Vehicles built Jan 2015 – Mar 2016
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
| 1.
REMOVE BATTERY SERVICE HOLE COVER |
|
| 2.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 3.
REMOVE FRONT DOOR SCUFF PLATE RH |
|
| 4.
REMOVE FRONT SEAT ASSEMBLY RH |
 |
(Click here)
| 5.
REMOVE ECM |
 |
Fold back the floor carpet.
- Remove the 3 bolts from the ECM.
- Raise the 2 levers while pushing the locks on the 2 levers, disconnect the 2 ECM connectors and remove the ECM.
Text in Illustration
*a
|
Push
|
*b
|
Lock
|
- NOTICE:
- After disconnecting the ECM connector, make sure that dirt, water and other foreign matter does not contact the ECM connector.
| 6.
REMOVE NO. 1 ECM BRACKET |
 |
- Remove the 3 screws and No. 1 ECM bracket.
| 7.
REMOVE NO. 2 ECM BRACKET |
 |
- Remove the 2 screws and No. 2 ECM bracket.