2014-2019 Hiace · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Apr 2016 – Dec 2016

Versions by build date: Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017


1. REMOVE BATTERY SERVICE HOLE COVER

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE FRONT DOOR SCUFF PLATE RH

4. REMOVE FRONT SEAT ASSEMBLY RH
(Click here)

5. REMOVE ECM
  1. Fold back the floor carpet.

  1. A341609
    Remove the 3 bolts from the ECM.

  1. A341610E01
    Raise the 2 levers while pushing the locks on the 2 levers, disconnect the 2 ECM connectors and remove the ECM.
    Text in Illustration 
    *a
    Push
    *b
    Lock

    NOTICE:
    After disconnecting the ECM connector, make sure that dirt, water and other foreign matter does not contact the ECM connector.


6. REMOVE NO. 1 ECM BRACKET

  1. A341611
    Remove the 3 screws and No. 1 ECM bracket.


7. REMOVE NO. 2 ECM BRACKET

  1. A341612
    Remove the 2 screws and No. 2 ECM bracket.

← REMOVAL (Jan 2015 – Mar 2016)REMOVAL (from Jan 2017) →