2014-2019 Hiace · Service Manual
ENGINE
Home
›
ENGINE
› 2TR-FE ENGINE CONTROL SYSTEM › ACCELERATOR PEDAL ROD
REMOVAL
Removal / installation
·
Vehicles built from Oct 2014
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY
Disconnect the accelerator pedal connector.
Remove the 2 nuts and accelerator pedal.
NOTICE:
Avoid physical shock to the accelerator pedal.
Do not disassemble the accelerator pedal assembly.
← ON-VEHICLE INSPECTION (from Oct 2014)
INSTALLATION (Oct 2014 – Dec 2016) →