2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT FAN & GENERATOR V BELT

  1. B000543E13
    Check the belt for wear, cracks or other signs of damage.
    If any of the following defects is found, replace the fan and generator V belt.
    1. The belt is cracked.
    2. The belt is worn out to the extent that the cords are exposed.
    3. The belt has chunks missing from the ribs.

  1. B000540E20
    Check that the belt fits properly in the ribbed grooves.
    Text in Illustration 
    *a
    CORRECT
    *b
    INCORRECT

    HINT:
    Check with your hand to confirm that the belt has not slipped out of the grooves on the bottom of the pulley. If it has slipped out, replace the fan and generator V belt. Install a new fan and generator V belt correctly.

  1. A271098E01
    Check that the tensioner indicator mark is within range B shown in the illustration.
    If the mark is not within range B, replace the fan and generator V belt.

    HINT:
    If a new belt has been installed, check that the tensioner indicator mark is within range A.

← REMOVAL (from Oct 2014)INSTALLATION (from Oct 2014) →