2014-2019 Hiace · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built Oct 2014 – Dec 2016

Versions by build date: Oct 2014 – Dec 2016 from Jan 2017


1. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.2 RH

  1. B107604
    Using a screwdriver, disengage the claw and remove the reclining adjuster release handle No.2 RH.

    HINT:
    Tape the screwdriver tip before use.


2. REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.2 LH

HINT:
Use the same procedures for the RH side and LH side.


3. REMOVE RECLINING ADJUSTER COVER RH

  1. B107605
    Disengage the 3 claws and remove the 2 screws and reclining adjuster cover RH.

    HINT:
    Tape the screwdriver tip before use.


4. REMOVE RECLINING ADJUSTER COVER LH

HINT:
Use the same procedures for the RH side and LH side.


5. REMOVE REAR SEAT LEG SIDE COVER NO.4

  1. B107606
    Remove the rear seat leg side cover No.4.


6. REMOVE REAR SEAT LEG SIDE COVER NO.5

  1. B107607
    Remove the rear seat leg side cover No.5.


7. REMOVE REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)

  1. B107678
    Remove the bolt and rear seat belt assembly inner.


8. REMOVE SEAT LAP TYPE BELT ASSEMBLY NO.1 (w/ Seat Lap Type Belt Assembly No.1)

  1. B107681
    Remove the bolt and seat lap type belt assembly No.1.


9. REMOVE NO.2 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD

  1. B107608
    Disengage the hooks and remove the No.2 seat cushion cover sub-assembly with pad.


10. REMOVE NO.2 SEAT CUSHION COVER SUB-ASSEMBLY

  1. B107609E01
    Remove the 5 hog rings.

  1. B107610E01
    Remove the 16 hog rings and No.2 seat cushion cover sub-assembly.


11. REMOVE NO.2 SEAT CUSHION PAD

12. REMOVE REAR SEAT 3-POINT TYPE BELT ASSEMBLY (w/ Rear Seat 3-Point Type Belt Assembly)

  1. B105623
    Remove the 4 screws.

  1. Remove the 2 bolts and rear seat 3 point type belt assembly.


13. REMOVE NO.2 SEAT LEG SUB-ASSEMBLY

  1. B107611
    w/o Seat belt:

    1. Remove the 8 bolts and No.2 seat leg sub-assembly.

  1. w/ Rear seat lap type belt assembly:

    1. Remove the 8 bolts and No.2 seat leg sub-assembly.

  1. B105595
    w/ Rear seat 3-point type belt assembly:

    1. Remove the 7 bolts and No.2 seat leg sub-assembly.


14. REMOVE REAR SEAT LAP TYPE BELT ASSEMBLY (w/ Rear Seat Lap Type Belt Assembly)

  1. B107677
    Remove the bolt and rear seat lap type belt assembly.


15. REMOVE REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)

  1. B107676
    Remove the bolt and rear seat belt assembly inner.


16. REMOVE REAR SEAT HEADREST ASSEMBLY

17. REMOVE REAR SEAT CUSHION SHIELD INNER NO.1 RH

  1. B107612
    Remove the screw and rear seat cushion shield inner No.1 RH.


18. REMOVE REAR SEAT CUSHION SHIELD INNER NO.1 LH

HINT:
Use the same procedures for the RH side and LH side.


19. REMOVE REAR SEATBACK SHIELD LH

  1. B107613
    Disengage the claw and remove the screw and rear seatback shield LH.


20. REMOVE REAR SEATBACK SHIELD RH

HINT:
Use the same procedures for the RH side and LH side.


21. REMOVE ASSIST GRIP (w/ Assist Grip)

  1. B107614
    Disengage the 6 claws and 2 assist grip covers.

    HINT:
    Use the same procedures for the RH side and LH side.

  1. B107615
    Remove the 2 screws and assist grip.

    HINT:
    Use the same procedures for the RH side and LH side.


22. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY (w/ Assist Grip)

  1. B107616
    Disengage the 2 claws and remove the rear seatback board sub-assembly.

    HINT:
    Use the same procedures for the RH side and LH side.


23. REMOVE REAR SEAT HEADREST SUPPORT

  1. B107617
    Open the fastener of the No.2 seatback cover sub-assembly.

    HINT:
    Use the same procedures for the RH side and LH side.

  1. B107618
    Disengage the 2 claws and remove the rear seat headrest support.

    HINT:
    Use the same procedures for the RH side and LH side.


24. REMOVE REAR SEAT HEADREST SUPPORT

HINT:
Use the same procedures for the RH side and LH side.


25. REMOVE NO.2 SEATBACK COVER SUB-ASSEMBLY WITH PAD

  1. B107619
    Remove the No.2 seatback cover sub-assembly with pad from the No.2 seatback spring assembly.

    HINT:
    Use the same procedures for the RH side and LH side.


26. REMOVE NO.2 SEATBACK COVER SUB-ASSEMBLY

  1. B107620E01
    Remove the 2 hog rings and No.2 seatback cover sub-assembly.

    HINT:
    Use the same procedures for the RH side and LH side.


27. REMOVE NO.2 SEATBACK PAD

28. REMOVE NO.2 SEATBACK SPRING ASSEMBLY RH

29. REMOVE NO.2 SEATBACK SPRING ASSEMBLY LH
← REMOVAL (from Jan 2017)DISASSEMBLY (from Jan 2017) →