REASSEMBLY
Removal / installation · Vehicles built Oct 2014 – Dec 2016
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1.
INSTALL NO.4 SEATBACK SPRING ASSEMBLY |
|
| 2.
INSTALL REAR SEAT 3-POINT TYPE BELT ASSEMBLY (w/ Rear Seat 3-Point Type Belt Assembly)
|
 |
- Install the rear seat 3 point type belt assembly with the nut.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
Install the 3 screws.
| 3.
INSTALL REAR SEAT SHOULDER BELT HOLE COVER (w/ Rear Seat 3-Point Type Belt Assembly) |
|
| 4.
INSTALL REAR SEAT CUSHION SHIELD INNER NO.1 (w/ Rear Seat 3-Point Type Belt Assembly) |
|
| 5.
INSTALL NO.4 SEAT FRONT BRACKET COVER |
|
| 6.
INSTALL NO.4 SEATBACK PAD |
|
| 7.
INSTALL NO.4 SEATBACK COVER SUB-ASSEMBLY (w/o Headrest) |
 |
- Using hog ring pliers, install the No.4 seatback cover sub-assembly with 4 new hog rings.
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
- Engage the hook of the No.4 seatback cover sub-assembly.
Close the fastener of the No.4 seatback cover sub-assembly.
| 8.
INSTALL NO.4 SEATBACK COVER SUB-ASSEMBLY (w/ Headrest) |
 |
- Using hog ring pliers, install the No.4 seatback cover sub-assembly with 4 new hog rings.
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
| 9.
INSTALL REAR SEATBACK LOCK BEZEL LOWER (w/ Rear Seat 3-Point Type Belt Assembly) |
|
| 10.
INSTALL REAR SEATBACK LOCK BEZEL UPPER (w/ Rear Seat 3-Point Type Belt Assembly) |
|
| 11.
INSTALL REAR SEAT HEADREST SUPPORT LH (w/ Headrest) |
|
| 12.
INSTALL REAR SEAT HEADREST SUPPORT RH (w/ Headrest) |
|
| 13.
INSTALL REAR SEAT CUSHION |
|
| 14.
INSTALL REAR SEAT HEADREST ASSEMBLY (w/ Headrest) |
|
| 15.
INSTALL REAR SEAT CUSHION SPRING ASSEMBLY |
|
| 16.
INSTALL REAR SEAT CUSHION SPACER |
|
| 17.
INSTALL REAR SEAT LOCK HANDLE KNOB |
|
| 18.
INSTALL REAR SEAT CUSHION SPACER |
|
| 19.
INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)
|
 |
- Install the rear seat belt assembly inner with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 20.
INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)
|
 |
- Install the rear seat belt assembly inner with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 21.
INSTALL REAR SEAT CUSHION UNDER COVER |
|
| 22.
INSTALL REAR SEAT CUSHION LOCK HOOK SUB-ASSEMBLY |
|
| 23.
INSTALL REAR SEAT CUSHION LEG HINGE |
 |
- Install the rear seat cushion leg hinge with the bolt and spacer.
-
Torque:
- 29 N*m{
296 kgf*cm
, 21 ft.*lbf
}
| 24.
INSTALL NO.4 SEAT CUSHION PAD |
|
| 25.
INSTALL NO.4 SEAT CUSHION COVER SUB-ASSEMBLY |
 |
- Using hog ring pliers, install the No.4 seat cushion cover sub-assembly with 12 new hog rings.
- NOTICE:
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.
- Using hog ring pliers, install the 4 new hog rings.
- NOTICE:
- Be careful not to damage the cover.
| 26.
INSTALL NO.4 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD |
 |
- Install the No.4 seat cushion cover sub-assembly with pad with the hook and 2 clips.
- Install the No.4 seat cushion assembly with the 4 bolts.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 27.
CONNECT REAR SEAT 3-POINT TYPE BELT ASSEMBLY (w/ Rear Seat 3-Point Type Belt Assembly)
|
 |
Connect the rear seat 3-point type belt assembly with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 28.
INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY (w/ Rear SEat Lap Type Belt Assembly)
|
 |
- Install the rear seat belt assembly inner with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 29.
INSTALL LAP BELT OUTER ANCHOR COVER (w/ Seat Belt) |
|
| 30.
INSTALL SEAT LAP TYPE BELT ASSEMBLY NO.1 (w/ Seat Lap Type Belt Assembly No.1)
|
 |
- Install the seat lap type belt assembly No.1 with the bolt.
-
Torque:
- 42 N*m{
428 kgf*cm
, 31 ft.*lbf
}
| 31.
INSTALL RECLINING ADJUSTER COVER RH |
|
| 32.
INSTALL RECLINING ADJUSTER COVER LH |
|
| 33.
INSTALL RECLINING ADJUSTER RELEASE HANDLE |
|
| 34.
INSTALL NO.4 SEAT LEG BRACKET REAR |
 |
- Install the No.4 seat leg bracket rear with the bolt and spacer.
-
Torque:
- 29 N*m{
296 kgf*cm
, 21 ft.*lbf
}