DISASSEMBLY
Removal / installation · Vehicles built Oct 2014 – Dec 2016
Versions by build date: Oct 2014 – Dec 2016 from Jan 2017
| 1.
REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.3 RH |
 |
- Using a screwdriver, disengage the claw and remove the reclining adjuster release handle No.3 RH.
- HINT:
- Tape the screwdriver tip before use.
| 2.
REMOVE RECLINING ADJUSTER RELEASE HANDLE NO.3 LH |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 3.
REMOVE RECLINING ADJUSTER RELEASE HANDLE |
 |
Remove the screw and reclining adjuster release handle.
| 4.
REMOVE RECLINING ADJUSTER COVER RH |
 |
- Disengage the 3 claws and remove the 2 screws and reclining adjuster cover RH.
- HINT:
- Tape the screwdriver tip before use.
| 5.
REMOVE RECLINING ADJUSTER COVER LH |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 6.
REMOVE REAR SEAT LEG SIDE COVER NO.4 |
 |
- Remove the rear seat leg side cover No.4.
| 7.
REMOVE REAR SEAT LEG SIDE COVER NO.5 |
 |
- Remove the rear seat leg side cover No.5.
| 8.
REMOVE REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)
|
 |
- HINT:
- Follow the same procedure as for the rear No.2 seat assembly.
| 9.
REMOVE SEAT LAP TYPE BELT ASSEMBLY NO.1 (w/ Seat Lap Type Belt Assembly No.1)
|
 |
- HINT:
- Follow the same procedure as for the rear No.2 seat assembly.
| 10.
REMOVE NO.3 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD |
 |
- Disengage the hooks and remove the No.3 seat cushion cover sub-assembly with pad.
| 11.
REMOVE NO.3 SEAT CUSHION COVER SUB-ASSEMBLY |
 |
Remove the 7 hog rings.


Remove the 24 hog rings and No.3 seat cushion cover sub-assembly.


| 12.
REMOVE NO.3 SEAT CUSHION PAD |
|
| 13.
REMOVE REAR SEAT 3-POINT TYPE BELT ASSEMBLY (w/ Rear Seat 3-Point Type Belt Assembly)
|
 |
- Remove the 8 screws.
Remove the 4 bolts and 2 rear seat 3 point type belt assemblies.
| 14.
REMOVE NO.3 SEAT LEG SUB-ASSEMBLY |
 |
- w/o Seat belt:
Remove the 12 bolts and No.3 seat leg sub-assembly.
w/ Rear seat lap type belt assembly:
Remove the 12 bolts and No.3 seat leg sub-assembly.
- w/ Rear seat 3-point type belt assembly:
Remove the 10 bolts and No.3 seat leg sub-assembly.
| 15.
REMOVE REAR SEAT LAP TYPE BELT ASSEMBLY (w/ Rear Seat Lap Type Belt Assembly)
|
 |
- HINT:
- Follow the same procedure as for the rear No.2 seat assembly.
| 16.
REMOVE REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)
|
 |
- HINT:
- Follow the same procedure as for the rear No.2 seat assembly.
| 17.
REMOVE REAR SEAT HEADREST ASSEMBLY |
|
| 18.
REMOVE REAR SEAT CUSHION SHIELD INNER NO.1 RH |
 |
- Remove the screw and rear seat cushion shield inner No.1 RH.
| 19.
REMOVE REAR SEAT CUSHION SHIELD INNER NO.1 LH |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 20.
REMOVE REAR SEATBACK SHIELD LH |
 |
- Disengage the claw and remove the screw and rear seatback shield LH.
| 21.
REMOVE REAR SEATBACK SHIELD RH |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 22.
REMOVE ASSIST GRIP |
 |
- Disengage the 6 claws and 2 assist grip covers.
- HINT:
- Use the same procedures for the RH side and LH side.
- Remove the 2 screws and assist grip.
- HINT:
- Use the same procedures for the RH side and LH side.
| 23.
REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY |
 |
- Disengage the 2 claws and remove the rear seatback board sub-assembly.
- HINT:
- Use the same procedures for the RH side and LH side.
| 24.
REMOVE REAR SEAT HEADREST SUPPORT |
 |
- Open the fastener of the No.3 seatback cover sub-assembly.
- HINT:
- Use the same procedures for the RH side and LH side.
- Disengage the 2 claws and remove the rear seat headrest support.
- HINT:
- Use the same procedures for the RH side and LH side.
| 25.
REMOVE REAR SEAT HEADREST SUPPORT |
 |
- HINT:
- Use the same procedures for the RH side and LH side.
| 26.
REMOVE NO.3 SEATBACK COVER SUB-ASSEMBLY WITH PAD |
 |
- Remove the No.3 seatback cover sub-assembly with pad from the No.3 seatback spring assembly.
- HINT:
- Use the same procedures for the RH side and LH side.
| 27.
REMOVE NO.3 SEATBACK COVER SUB-ASSEMBLY |
 |
- Remove the 2 hog rings and No.3 seatback cover sub-assembly.
- HINT:
- Use the same procedures for the RH side and LH side.
| 28.
REMOVE NO.3 SEATBACK PAD |
|
| 29.
REMOVE NO.3 SEATBACK SPRING ASSEMBLY RH |
|
| 30.
REMOVE NO.3 SEATBACK SPRING ASSEMBLY |
|
| 31.
REMOVE NO.3 SEATBACK SPRING ASSEMBLY LH |
|