2014-2019 Hiace · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built Oct 2014 – Dec 2016

Versions by build date: Oct 2014 – Dec 2016 from Jan 2017


1. INSTALL NO.3 SEATBACK SPRING ASSEMBLY LH

2. INSTALL NO.3 SEATBACK SPRING ASSEMBLY

3. INSTALL NO.3 SEATBACK SPRING ASSEMBLY RH

4. INSTALL NO.3 SEATBACK PAD

5. INSTALL NO.3 SEATBACK COVER SUB-ASSEMBLY

  1. B107621E01
    Using hog ring pliers, install the No.3 seatback cover sub-assembly with 2 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

    HINT:
    Use the same procedures for the RH side and LH side.


6. INSTALL NO.3 SEATBACK COVER SUB-ASSEMBLY WITH PAD

7. INSTALL REAR SEAT HEADREST SUPPORT LH

8. INSTALL REAR SEAT HEADREST SUPPORT RH

9. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY

10. INSTALL ASSIST GRIP

11. INSTALL REAR SEAT BACK SHIELD RH

12. INSTALL REAR SEAT BACK SHIELD LH

13. INSTALL REAR SEAT CUSHION SHIELD INNER NO.1 LH

14. INSTALL REAR SEAT CUSHION SHIELD INNER NO.1 RH

15. INSTALL REAR SEAT HEADREST ASSEMBLY

16. INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)

HINT:
Follow the same procedure as for the rear No.2 seat assembly.


17. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY (w/ Rear Seat Lap Type Belt Assembly)

HINT:
Follow the same procedure as for the rear No.2 seat assembly.


18. INSTALL NO.3 SEAT LEG SUB-ASSEMBLY

  1. B105611
    w/o Seat belt:

    1. Install the No.3 seat leg sub-assembly with the 12 bolts.

      Torque:
      41 N*m{ 418 kgf*cm , 30 ft.*lbf }

  1. w/ Rear seat lap type belt assembly:

    1. Install the No.3 seat leg sub-assembly with the 12 bolts.

      Torque:
      41 N*m{ 418 kgf*cm , 30 ft.*lbf }

  1. B105610
    w/ Rear seat 3-point type belt assembly:

    1. Install the No.3 seat leg sub-assembly with the 10 bolts.

      Torque:
      41 N*m{ 418 kgf*cm , 30 ft.*lbf }


19. INSTALL REAR SEAT 3-POINT TYPE BELT ASSEMBLY (w/ Rear Seat 3-Point Type Belt Assembly)

  1. B105630
    Install the 2 rear seat 3 point type belt assemblies with the 4 bolts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Install the 8 screws.


20. INSTALL NO.3 SEAT CUSHION PAD

21. INSTALL NO.3 SEAT CUSHION COVER SUB-ASSEMBLY
  1. Using hog ring pliers, install the No.3 seat cushion cover sub-assembly with 24 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.

    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

      B113364E01

  1. Using hog ring pliers, install the 7 new hog rings.

    NOTICE:
    Be careful not to damage the cover.


    B113365E01


22. INSTALL NO.3 SEAT CUSHION COVER SUB-ASSEMBLY WITH PAD

23. INSTALL SEAT LAP TYPE BELT ASSEMBLY NO.1 (w/ Seat Lap Type Belt Assembly NO.1)

HINT:
Follow the same procedure as for the rear No.2 seat assembly.


24. INSTALL REAR SEAT BELT ASSEMBLY INNER (w/ Seat Belt)

HINT:
Follow the same procedure as for the rear No.2 seat assembly.


25. INSTALL REAR SEAT LEG SIDE COVER NO.5

26. INSTALL REAR SEAT LEG SIDE COVER NO.4

27. INSTALL RECLINING ADJUSTER COVER LH

28. INSTALL RECLINING ADJUSTER COVER RH

29. INSTALL RECLINING ADJUSTER RELEASE HANDLE

30. INSTALL RECLINING ADJUSTER RELEASE HANDLE NO.3 LH

31. INSTALL RECLINING ADJUSTER RELEASE HANDLE NO.3 RH
← DISASSEMBLY (from Jan 2017)REASSEMBLY (from Jan 2017) →