2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Jan 2017


1. INSTALL FAN AND GENERATOR V BELT
  1. Set the fan and generator V belt onto each part.

    HINT:
    When installing the fan and generator V belt, attach the fan and generator V belt to the No. 1 idler pulley sub-assembly last.

  1. While turning the V-ribbed belt tensioner assembly clockwise, remove the pin.

  1. Check that the fan and generator V belt fits properly in the ribbed grooves.

    NOTICE:
    Make sure that the fan and generator V belt is set properly on each pulley.

← REMOVAL (from Jan 2017)COMPONENTS (from Jan 2017) →