2014-2019 Hiace · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Jan 2017

Versions by build date: Oct 2014 – Dec 2016 from Jan 2017


1. INSTALL TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL

  1. A056913E02
    Apply MP grease to a new oil seal lip.

  1. Using SST and a hammer, tap in the oil seal to the depth of 0.5 mm (0.020 in.) from the oil pump case edge.

    SST
    09214-60010  


2. INSTALL CRANKSHAFT TIMING PULLEY

  1. A056897E02
    Align the pulley set key with the key groove of the timing pulley.

  1. Using SST and a hammer, tap in the timing pulley with the flange side facing inward.

    SST
    09223-46011  


3. INSTALL TIMING BELT
(Click here)
← INSTALLATION (Oct 2014 – Dec 2016)COMPONENTS (Oct 2014 – Nov 2017) →