2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT WATER TEMPERATURE SENSOR

  1. Z017274E12
    Resistance inspection.

    1. Using an ohmmeter, measure the resistance according to the value(s) in the table below.

      Standard resistance:
      Temperature
      Resistance
      at 20°C (68°F)
      2.32 to 2.59 kΩ
      at 80°C (176°F)
      0.310 to 0.326 kΩ

      NOTICE:
      In case of checking the water temperature sensor in the water, be careful not to allow water to go into the terminals, and after checking, wipe out the sensor.

← REMOVAL (from Oct 2014)INSTALLATION (from Oct 2014) →