2014-2019 Hiace · Service Manual TRANSMISSION

TERMINALS OF ECM

System information · Vehicles built from Jan 2015


ECM
C321016E01

HINT:
The standard voltage between each pair of ECM terminals is shown in the table below. In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".
Use the illustration below as a reference for the ECM terminals.

Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
B94-13 (CANH) - D116-59 (E1)
B - W-B
CAN communication line
Ignition switch ON
Pulse generation
B94-23 (NSW) - D116-59 (E1)
B - W-B
Park/neutral position switch signal
Ignition switch ON and shift lever in P or N
Below 1 V
Ignition switch ON and shift lever not in P or N
11 to 14 V
B94-26 (CANL) - D116-59 (E1)
W - W-B
CAN communication line
Ignition switch ON
Pulse generation
B94-42 (SFTU) - D116-59 (E1)
R - W-B
Up-shift position switch signal
Ignition switch ON and shift lever in S
11 to 14 V
Ignition switch ON and shift lever in "+" (Up-shift)
Below 1 V
B94-43 (SFTD) - D116-59 (E1)
L - W-B
Down-shift position switch signal
Ignition switch ON and shift lever in S
11 to 14 V
Ignition switch ON and shift lever in "-" (Down-shift)
Below 1 V
B94-59 (S) - D116-59 (E1)
B - W-B
S shift position switch signal
Ignition switch ON and shift lever in S, "+" or "-"
11 to 14 V
Ignition switch ON and shift lever not in S, "+" or "-"
Below 1 V
D116-5 (SL4+) - D116-4 (SL4-)
W - P
Shift solenoid valve SL4 signal
3rd or 5th gear
Pulse generation
D116-7 (SL3+) - D116-6 (SL3-)
LG - P
Shift solenoid valve SL3 signal
2nd or 6th gear
Pulse generation
D116-9 (SL2+) - D116-8 (SL2-)
R - G
Shift solenoid valve SL2 signal
4th, 5th or 6th gear
Pulse generation
D116-11 (SL1+) - D116-10 (SL1-)
L - Y
Shift solenoid valve SL1 signal
1st, 2nd, 3rd or 4th gear
Pulse generation
D116-13 (SLU+) - D116-12 (SLU-)
GR - Y
Shift solenoid valve SLU signal
2nd, 3rd, 4th, 5th or 6th gear (Flex lock-up on)
Pulse generation
D116-15 (SLT+) - D116-14 (SLT-)
L - W
Shift solenoid valve SLT signal
Engine idling
Pulse generation
D116-39 (N) - D116-59 (E1)
GR- W-B
N shift position switch signal
Ignition switch ON and shift lever in N
11 to 14 V
Ignition switch ON and shift lever not in N
Below 1 V
D116-40 (SL) - D116-59 (E1)
GR- W-B
Shift solenoid valve SL signal
All gears
11 to 14 V
D116-65 (R) - D116-59 (E1)
L- W-B
R shift position switch signal
Ignition switch ON and shift lever in R
11 to 14 V
Ignition switch ON and shift lever not in R
Below 1 V
D116-66 (D) - D116-59 (E1)
R- W-B
D shift position switch signal
Ignition switch ON and shift lever in D, S, "+" or "-"
11 to 14 V
Ignition switch ON and shift lever not in D, S, "+" or "-"
Below 1 V
D116-70 (P) - D116-59 (E1)
W- W-B
P shift position switch signal
Ignition switch ON and shift lever in P
11 to 14 V
Ignition switch ON and shift lever not in P
Below 1 V
D116-85 (THO2) - D116-128 (ETHO)
B- Y
No. 2 ATF temperature sensor signal
No. 2 ATF temperature: 115°C (239°F) or higher
Below 1.5 V
D116-123 (NTO) - D116-59 (E1)
R- W-B
Transmission revolution sensor (NT) signal
Engine idling
Pulse generation
D116-124 (NTB) - D116-59 (E1)
G- W-B
Power source for sensor (fixed voltage)
Ignition switch ON
11 to 14 V
D116-125 (SP2O) - D116-59 (E1)
L- W-B
Transmission revolution sensor (SP2) signal
Vehicle driving
Pulse generation
D116-126 (SP2B) - D116-59 (E1)
Y- W-B
Power source for sensor (fixed voltage)
Ignition switch ON
11 to 14 V
D116-127 (THO1) - D116-128 (ETHO)
B- Y
No. 1 ATF temperature sensor signal
No. 1 ATF temperature: 115°C (239°F) or higher
Below 1.5 V
← PROBLEM SYMPTOMS TABLE (from Jan 2017)DIAGNOSIS SYSTEM (Jan 2015 – Mar 2016) →