INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (W/ POWER WINDOW) |
Disconnect the power window master switch assembly.

Measure the resistance when the switch is operated according to the value(s) in the table below.
- Standard resistance:
Tester Connection
Door Lock Condition
Specified Condition
1 - 8
ON (Door lock set to UNLOCK)
Below 1 Ω
1 - 5
OFF (Door Lock set to LOCK)
Below 1 Ω
| INSPECT DOOR CONTROL SWITCH ASSEMBLY (W/O POWER WINDOW) |
Disconnect the door control switch assembly.

Measure the resistance when the switch is operated according to the value(s) in the table below.
- Standard resistance:
Tester Connection
Door Lock Condition
Specified Condition
5 - 6
ON (Door lock set to UNLOCK)
Below 1 Ω
3 - 6
OFF (Door Lock set to LOCK)
Below 1 Ω
