2014-2019 Hiace · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jan 2015

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015


INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (w/ Dual VVT-i)
  1. for Intake Side:

    1. Connect the GTS to the DLC3.

    2. Start the engine.

    3. Turn the GTS on.

    4. Warm up the engine.

    5. Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Linear (Bank 1).

    6. Check the engine speed while operating the camshaft timing oil control valve using the GTS.

      Specified Condition:
      GTS Operation
      Specified Condition
      0%
      Normal engine speed
      100%
      Engine idles roughly or stalls

      If the result is not as specified, check the camshaft timing oil switching valve assembly, wire harness and ECM.

  1. for Exhaust Side:

    1. Connect the GTS to the DLC3.

    2. Start the engine.

    3. Turn the GTS on.

    4. Warm up the engine.

    5. Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT Exhaust Linear (Bank 1).

    6. Check the engine speed while operating the camshaft timing oil control valve using the GTS.

      Specified Condition:
      GTS Operation
      Specified Condition
      0%
      Normal engine speed
      100%
      Engine idles roughly or stalls

      If the result is not as specified, check the camshaft timing oil switching valve assembly, wire harness and ECM.


INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (w/o Dual VVT-i)
  1. Connect the GTS to the DLC3.

  1. Start the engine.

  1. Turn the GTS on.

  1. Warm up the engine.

  1. Enter the following menus: Powertrain / Engine and ECT / Active Test / Activate the VVT System (Bank 1).

  1. Operate the camshaft timing oil control valve using the intelligent tester, and check the engine using the intelligent tester, and check the engine

    Specified Condition:
    Tester Operation
    Specified Condition
    Camshaft timing oil control valve OFF
    Normal engine speed
    Camshaft timing oil control valve ON
    Engine idles roughly or stalls soon after OCV switched from OFF to ON

    If the result is not as specified, check the camshaft timing oil switching valve assembly, wire harness and ECM.

← ON-VEHICLE INSPECTION (Oct 2014 – Dec 2014)REMOVAL (Oct 2014 – Dec 2014) →