INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT FRONT SEAT INNER BELT ASSEMBLY (DRIVER SIDE) |
Disconnect the front seat inner belt assembly.

Measure the resistance when the switch is operated according to the value(s) in the table below.
- Standard resistance:
Tester Connection
Condition
Specified Condition
1 - 2
Seat belt is fastened
10 kΩ or higher
1 - 2
Seat belt is unfastened
Below 1 Ω
| INSPECT FRONT SEAT INNER BELT ASSEMBLY (FRONT PASSENGER SIDE) |
Disconnect the front seat inner belt assembly.

Measure the resistance when the switch is operated according to the value(s) in the table below.
- Standard resistance:
Tester Connection
Condition
Specified Condition
1 - 2
Seat belt is fastened
10 kΩ or higher
1 - 2
Seat belt is unfastened, front passenger seat occupied
Below 100 MΩ
