HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built from Oct 2014
- HINT:
- The intelligent tester can be used at steps 3, 4, 6, and 9.
| 1.Vehicle Brought to Workshop |
| |||||
| 2.Customer Problem Analysis |
| |||||
| 3.Connect the intelligent tester to DLC3 |
| |||||
| 4.Check and Clear DTC and Freeze Frame Data |
| |||||
| 5.Visual Inspection |
| |||||
| 6.Setting the Check Mode Diagnosis |
| |||||
| 7.Problem Symptom Confirmation |
|
||||
|
| 8.Symptom Simulation |
| |||||
| 9.DTC Check |
|
||||
|
| 10.Basic Inspection |
|
|||||
| |||||
| 11.Mechanical System Test |
|
|||||
| |||||
| 12.Hydraulic Test |
|
|||||
| |||||
| 13.Manual Shifting Test |
|
|||||
| |||||
| 14.Problem Symptoms Table Chapter 1 |
|
|||||
| |||||
| 15.Problem Symptoms Table Chapter 2 |
|
|||||
| |||||
| 16.Problem Symptoms Table Chapter 3 |
| |||||
| 17.Part Inspection |
|
| 18.DTC Chart |
| |||||
| 19.Circuit Inspection |
| |||||
| 20.Repair or Replace |
| |||||
| 21.Confirmation Test |
| |||||