2014-2019 Hiace · Service Manual TRANSMISSION

TERMINALS OF ECM

System information · Vehicles built from Oct 2014


ECM
C176147E33

HINT:
Each ECM terminal's standard voltage is shown in the table below.
In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specific Condition".
Use the illustration above as a reference for the ECM terminals.

Symbols (Terminals No.)
Wiring Color
Terminal Description
Condition
Specified Condition
P (D97-17) - E1 (D97-105)
W - W-B
P shift position switch signal
IG switch ON and shift lever P position
10 to 14 V
↑
↑
↑
IG switch ON and shift lever except P position
Below 1 V
R (D97-76) - E1 (D97-105)
L - W-B
R shift position switch signal
IG switch ON and shift lever R position
10 to 14 V
↑
↑
↑
IG switch ON and shift lever except R position
Below 1 V
N (D97-99) - E1 (D97-105)
GR - W-B
N shift position switch signal
IG switch ON and shift lever N position
10 to 14 V
↑
↑
↑
IG switch ON and shift lever except N position
Below 1 V
D (B71-47) - E1 (D97-105)
R - W-B
D shift position switch signal
IG switch ON and shift lever D or 3 position
10 to 14 V
↑
↑
↑
IG switch ON and shift lever except D or 3 position
Below 1 V
3 (D97-79) - E1 (D97-105)
B - W-B
3 shift position switch signal
IG switch ON and shift lever 3 position
10 to 14 V
↑
↑
↑
IG switch ON and shift lever except 3 position
Below 1 V
2 (D97-78) - E1 (D97-105)
Y - W-B
2 shift position switch signal
IG switch ON and shift lever 2 position
10 to 14 V
↑
↑
↑
IG switch ON and shift lever except 2 position
Below 1 V
L (D97-39) - E1 (D97-105)
R - W-B
L shift position switch signal
IG switch ON and shift lever L position
10 to 14 V
↑
↑
↑
IG switch ON and shift lever except L position
Below 1 V
STP (B71-36) - E1 (D97-105)
Y - W-B
Stop light switch signal
Brake pedal is depressed
7.5 to 14 V
↑
↑
↑
Brake pedal is released
Below 1.5 V
S2 (D97-55) - E1 (D97-105)
P - W-B
S2 solenoid signal
2nd or 3rd gear
10 to 14 V
↑
↑
↑
1st or 4th gear
Below 1 V
S1 (D97-56) - E1 (D97-105)
LG - W-B
S1 solenoid signal
1st or 2nd gear
10 to 14 V
↑
↑
↑
3rd or 4th gear
Below 1 V
SLT+ (D97-54) - SLT- (D97-53)
L - W
SLT solenoid signal
Engine idling
Pulse generation
(See waveform 1)
SL (D97-61) - E1 (D97-105)
GR - W-B
SL solenoid signal
IG switch ON
Below 1.5 V
↑
↑
↑
Vehicle driving under lock-up position
10 to 14 V
THOC (D97-114) - E2 (D97-72)
B - Y
ATF temperature sensor signal
ATF temperature: 115°C (239°F) or more
Below 1.5 V
SP2+ (D97-125) - SP2- (D97-101)
G - R
Speed sensor (SP2) signal
Vehicle speed 20 km/h (12 mph)
Pulse generation
(See waveform 3)
NCO+ (D97-122) - NCO- (D97-100)
Y - L
Speed sensor (NCO) signal
Engine idling
Pulse generation
(See waveform 2)
NSW (B71-25) - E1 (D97-105)
B - W-B
Park neutral switch signal
IG switch ON and shift lever P and N position
Below 2 V
↑
↑
↑
IG switch ON and shift lever except P and N position
10 to 14 V

  1. G023426E19
    Waveform 1
    Reference: 
    Terminal
    SLT+ - SLT-
    Tool setting
    5 V/DIV., 1 ms/DIV.
    Vehicle condition
    Engine idling

  2. G034873E05
    Waveform 2
    Reference: 
    Terminal
    NCO+ - NCO-
    Tool setting
    5 V/DIV., 0.5 ms/DIV.
    Vehicle condition
    Engine idling (P or N position)

  3. G020664E15
    Waveform 3
    Reference: 
    Terminal
    SP2+ - SP2-
    Tool setting
    2 V/DIV., 20 ms/DIV.
    Vehicle condition
    Vehicle speed 20 km/h (12 mph)

← PROBLEM SYMPTOMS TABLE (from Dec 2017)DIAGNOSIS SYSTEM (Oct 2014 – Dec 2014) →