TERMINALS OF ECU
System information · Vehicles built from Oct 2014
| COMBINATION METER ASSEMBLY |


Disconnect the H20 combination meter assembly connector.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) |
Wiring Color |
Terminals Description |
Condition |
Specified Condition |
| H20-1 (L) - Body ground |
R - Body ground |
+B power supply |
Always |
11 to 14 V |
| H20-2 (IG+) - Body ground |
B - Body ground |
Ignition switch (IG) signal |
Ignition switch off → ON |
Below 1 V → 11 to 14 V |
| H20-4 (DCTY) - Body ground |
G - Body ground |
Front door courtesy light switch (Driver side) input |
Front driver side door closed → Open |
10 kΩ or higher → Below 1 Ω |
| H20-9 (KEYE) - Body ground |
Y - Body ground |
Key unlock warning switch input |
No key in ignition key cylinder → Key inserted |
10 kΩ or higher → Below 1 Ω |
| H20-21 (E1) - Body ground |
W-B - Body ground |
Ground |
Always |
Below 1 Ω |