INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT E.F.I. ENGINE COOLANT TEMPERATURE SENSOR |
Check the resistance.


Using an ohmmeter, measure the resistance between the terminals.
- Standard resistance:
Tester connection
Specified Condition
1 (E2) - 2 (THW)
2.32 to 2.59 kΩ at 20 °C (68 °F)
1 (E2) - 2 (THW)
0.310 to 0.326 kΩ at 80 °C (176 °F)
- NOTICE:
- If checking the engine coolant temperature sensor in water, be careful not to allow water to intrude into the terminals. After checking, clean off water on the engine coolant temperature sensor.
