2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT ENGINE COOLANT TEMPERATURE SENSOR

  1. A224398E02
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    2.32 to 2.59 kΩ
    1 - 2
    80°C (176°F)
    0.310 to 0.326 kΩ

    Text in Illustration 
    *a
    Component without harness connected
    (Engine Coolant Temperature Sensor)
    *b
    Resistance
    *c
    Temperature
    *d
    Acceptable Range

    NOTICE:
    When checking the engine coolant temperature sensor in water, be careful not to allow water to intrude into the terminals. After checking, clean off water on the engine coolant temperature sensor.

    If the result is not as specified, replace the engine coolant temperature sensor.

← REMOVAL (from Jan 2017)INSTALLATION (Oct 2014 – Dec 2014) →