2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT KNOCK CONTROL SENSOR

  1. A093606E02
    Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      1 (Ground) - 2 (Output)
      120 to 280 kΩ at 20 °C (68 °F)

      If the result is not as specified, replace the knock sensor.

← REMOVAL (from Jan 2017)INSTALLATION (Oct 2014 – Dec 2014) →