INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT IGNITION OR STARTER SWITCH ASSEMBLY |
Using an ohmmeter, measure the switch resistance.

- Standard:
Switch Condition
Tester Connection
Specified Condiition
LOCK
-
10kΩor higher
ACC
2 (AM1) - 3 (ACC)
Below 1 Ω
ON
- 1 (AM1) - 2 (ACC)
- 1 (AM1) - 3 (ACC)
- 5 (IG2) - 6 (AM2)
Below 1 Ω
START
- 1 (ST1) - 2 (AM1)
- 4 (ST1) - 5 (IG1)
- 5 (IG2) - 6(AM2)
- 5 (IG2) - 7 (ST2)
Below 1 Ω
- 1 (AM1) - 2 (ACC)
