2014-2019 Hiace · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Oct 2014


1. INSPECT ONE WAY CLUTCH ASSEMBLY

  1. AT08440E02
    Hold the planetary sun gear, and turn the 1 way clutch assembly Check that the 1 way clutch assembly hub can be freely clockwise and locked counterclockwise.


2. REMOVE ONE WAY CLUTCH ASSEMBLY

  1. AT08188
    Remove the 1 way clutch assembly from the sun gear input drum.


3. REMOVE ONE WAY CLUTCH THRUST WASHER NO.1

  1. AT01642
    Remove the 1 way clutch thrust washer from the sun gear input drum.


4. REMOVE SUN GEAR SHAFT OIL SEAL RING

  1. AT08189
    Remove the 2 oil seal rings from the sun gear input drum.


5. REMOVE SUN GEAR INPUT DRUM

  1. AT08190
    Use a wooden block or similar object as a work stand.

  1. AT07897
    Using a snap ring expander, remove the snap ring.

  1. Remove the sun gear input drum from the planetary sun gear.


6. REMOVE SUN GEAR INPUT DRUM SHAFT SNAP RING

  1. AT08182
    Using a screwdriver, remove the snap ring from the planetary sun gear.


7. INSPECT PLANETARY SUN GEAR SUB-ASSEMBLY

  1. AT08337
    Using a dial indicator, measure the inside diameter of the planetary sun gear bushings.

    Maximum inside diameter:
    27.08 mm (1.0661 in.)

    If the inside diameter is greater than the maximum, replace the planetary sun gear.

← COMPONENTS (from Oct 2014)INSPECTION (from Oct 2014) →