2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jan 2017


INSPECT INTAKE AIR TEMPERATURE SENSOR
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    20°C (68°F)
    2.21 to 2.65 kΩ
    60°C (140°F)
    0.54 to 0.62 kΩ

    If the result is not as specified, replace the intake air temperature sensor.

← REMOVAL (from Jan 2017)INSTALLATION (from Jan 2017) →