ON-VEHICLE INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT FUSE (HAZ-HORN) |
Check the resistance of HAZ-HORN fuse.
- Standard Resistance:
- Below 1 Ω
| INSPECT HORN RELAY |
Disconnect the horn relay connector.

Measure the resistance according to the value in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
C1 - A7
Always
Below 1 Ω
C1 - A6
Always
10 kΩ or higher
C1 - A6
When battery voltage is applied to terminals C1 and A7.
Below 1 Ω
