2014-2019 Hiace · Service Manual
ENGINE
Home
›
ENGINE
› 5L-E STARTING › GLOW PLUG
INSPECTION
Inspection
·
Vehicles built from Oct 2014
INSPECT GLOW PLUG RELAY
Measure the resistance of the relay.
Standard resistance:
Tester Connection
Specified Condition
3 - 5
10 kΩ or higher
3 - 5
Below 1 Ω (when battery voltage is applied to terminals 1 and 2)
If the result is not as specified, replace the relay assembly.
← REMOVAL (from Oct 2014)
INSTALLATION (from Oct 2014) →