ON-VEHICLE INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT HEATER RELAY |
Remove the heater relay from instrument panel J/B.

Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester connection
Condition
Specified condition
3 - 4
Always
Below 1 Ω
3 - 5
Always
10 kΩ or higher
3 - 4
Battery voltage to terminals 1 and 2
10 kΩ or higher
3 - 5
Battery voltage to terminals 1 and 2
Below 1 Ω
