ON-VEHICLE INSPECTION
Inspection · Vehicles built Oct 2014 – Dec 2014
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
- CAUTION:
- Be sure to follow the correct removal and installation procedures of the front airbag sensors.
| INSPECT FRONT AIRBAG SENSOR LH (for Vehicle not Involved in Collision) |
Perform a diagnostic system check (Click here).
| INSPECT FRONT AIRBAG SENSOR LH (for Vehicle Involved in Collision and Airbag not Deployed) |
Perform a diagnostic system check (Click here).
Visually check the front airbag sensors for defects if the front bumper of the vehicle or the area around the bumper is damaged.
The defects are as follows:
- Cracks on the sensor housing
- Dents on the sensor housing
- Chips on the sensor housing
- Cracks or other damage to the connector
- Damage to the serial number
- OK:
- No defects are found.
- HINT:
- If any of the defects is found, replace the front airbag sensor LH with a new one.
- Cracks on the sensor housing
| INSPECT FRONT AIRBAG SENSOR LH (Vehicle Involved in Collision and Airbag is Deployed) |
When airbags have deployed as the result of a collision, be sure to replace all front airbag sensors in the damaged areas (anywhere in need of repair).
Visually check the front airbag sensors in undamaged areas for defects.
The defects are as follows:
- Cracks on the sensor housing
- Dents on the sensor housing
- Chips on the sensor housing
- Cracks or other damage to the connector
- Damage to the serial number
- OK:
- No defects are found.
- HINT:
- If any of the defects is found or a front airbag sensor LH has detected a major collision, replace the front airbag sensor LH with a new one.
- Cracks on the sensor housing
