INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT FRONT ROOM LIGHT ASSEMBLY |
Remove the front room light assembly.

Apply battery voltage to the front room light assembly connector.
Check that the front room light comes on.
- OK:
Measurement condition
Switch condition
Specified condition
Battery positive (+) → Terminal 2
Battery negative (-) → Body ground
ON
Front room light comes on
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
DOOR
Front room light comes on
- HINT:
- Check that the ground wire of the front room light assembly is connected to body ground.
