INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT REAR ROOM LIGHT ASSEMBLY (W/ PERSONAL LIGHT ASSEMBLY) |
Remove the rear room light assembly.

Apply battery voltage to the rear room light connector.
Check that the rear room light comes on.
- OK:
Measurement condition
Switch condition
Specified condition
Battery positive (+) → Terminal 3
Battery negative (-) → Terminal 2
DOOR
Rear room light comes on
Battery positive (+) → Terminal 3
Battery negative (-) → Terminal 1
ON
Rear room light comes on
| INSPECT REAR ROOM LIGHT ASSEMBLY (W/O PERSONAL LIGHT ASSEMBLY) |
Remove the rear room light assembly.

Apply battery voltage to the rear room light connector.
Check that the rear room light comes on.
- OK:
Measurement condition
Switch condition
Specified condition
Battery positive (+) → Terminal 2
Battery negative (-) → Body ground
ON
Rear room light comes on
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1
DOOR
Rear room light comes on
- HINT:
- Check that the ground wire of the rear room light assembly is connected to body ground.
