2014-2019 Hiace · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT IGNITION KEY CYLINDER LIGHT

  1. B113722
    Remove the ignition key cylinder light.

  1. Apply battery voltage to the ignition key cylinder light connector.

  1. Check that the ignition key cylinder light comes on.

    OK:
    Measurement condition
    Specified condition
    Battery positive (+) → Terminal 1
    Battery negative (-) → Terminal 2
    Ignition key cylinder light comes on

    If the result is not as specified, replace the ignition key cylinder light.

← INSPECTION (from Oct 2014)COMPONENTS (from Oct 2014) →