2014-2019 Hiace · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT COOLING FAN RELAY

  1. A035654E01
    Measure the resistance according to the value(s) in the table below.
    Standard Resistance 
    Tester Connection
    condition
    Specified Condition
    3 - 5
    When battery voltage is not applied between 1 and 2
    10 kΩ or higher
    When battery voltage is applied between 1 and 2
    Below 1 Ω
    If the result is not as specified, replace the cooling fan relay.

← ON-VEHICLE INSPECTION (from Oct 2014)REPLACEMENT (from Oct 2014) →