REASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1.
INSTALL SUN GEAR INPUT DRUM SHAFT SNAP RING |
 |
- Using screwdriver, install the snap ring.
| 2.
INSTALL SUN GEAR INPUT DRUM |
 |
- Place a wooden block or similar object as a work stand, and place the planetary sun gear onto it.
Install the sun gear input drum onto the planetary sun gear.
- Using a snap ring expander, install the snap ring.
| 3.
INSTALL SUN GEAR SHAFT OIL SEAL RING |
 |
- Coat the 2 oil seal rings with ATF.
Install the 2 oil seal rings onto the planetary sun gear.
- NOTICE:
- Do not over-spread the ring ends.
- HINT:
- After installing the oil seal rings, check that they rotate smoothly.
| 4.
INSTALL 1 WAY CLUTCH THRUST WASHER NO.1 |
 |
- Install the 1 way clutch thrust washer No.1.
- HINT:
- Make sure that the lug shapes fit into the holes in the sun gear input drum.
| 5.
INSTALL 1 WAY CLUTCH ASSEMBLY |
 |
- Install the 1 way clutch assembly onto the planetary sun gear.
| 6.
INSPECT 1 WAY CLUTCH ASSEMBLY
|
 |
- Hold the planetary sun gear, and turn the 2nd brake hub. Check that the 2nd brake hub can be turned freely clockwise and locked counterclockwise.