DISASSEMBLY
Removal / installation · Vehicles built from Oct 2014
| 1.
REMOVE SYNCHRONIZER RING NO.2 |
 |
- Remove the synchronizer ring No.2 from the input shaft.
| 2.
REMOVE INPUT SHAFT BEARING |
 |
- Remove the input shaft bearing from the input shaft.
| 3.
REMOVE FRONT BEARING SHAFT SNAP RING |
 |
- Using a snap ring expander, remove the front bearing shaft snap ring from the input shaft.
| 4.
REMOVE INPUT SHAFT FRONT BEARING |
 |
- Using SST and a press, remove the input shaft front bearing from the input shaft.
- SST
- 09950-00020