INSPECTION
Inspection · Vehicles built from Oct 2014
| INSPECT COOLER CONTROL SWITCH |
Remove the cooler control switch and disconnect the connector.
Measure the resistance according to the value(s) in the table below.

- Standard resistance:
Tester connection
Switch position
Specified condition
Each terminal
OFF
10 kΩ or higher
4 - 8
LO
Below 1 Ω
1 - 4 - 8
LO - ME
Below 1 Ω
1 - 4 - 8
ME
Below 1 Ω
1 - 4 - 6 - 8
ME - HI
Below 1 Ω
4 - 6 - 8
HI
Below 1 Ω
