2014-2019 Hiace · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built from Jan 2015

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015

CHARGING SYSTEM (w/o Dual VVT-i) 
Battery
Standard gravity
1.25 to 1.29 at 20°C (68°F)
Fuse
Standard resistance
Below 1 Ω
Charging circuit without load
Standard current
10 A or less
Standard voltage
13.2 to 14.8 V
(when engine speed at 2000 rpm)
Charging circuit with load
Standard current
30 A or more
CHARGING SYSTEM (w/ Dual VVT-i) 
Battery
Standard gravity
1.25 to 1.29 at 20°C (68°F)
Standard voltage
1.26 to 1.28 V at 20°C (68°F)
Fuse
Standard resistance
Below 1 Ω
Charging circuit without load
Standard current
10 A or higher
Standard voltage
10.275 to 16.25 V
(when engine speed at 2000 rpm)
Charging circuit with load
Standard current
30 A or higher
GENERATOR (w/o Dual VVT-i) 
Generator brush holder assembly
Standard exposed length
9.5 to 11.5 mm (0.374 to 0.453 in.)
Minimum exposed length
4.5 mm (0.177 in.)
Generator rotor assembly
Standard resistance
Slip ring - Slip ring
2.3 to 2.7 at 20°C (68°F)
Slip ring - Rotor core
10 MΩ higher
Slip ring diameter
Standard diameter
14.2 to 14.4 mm (0.559 to 0.567 in.)
Minimum diameter
14.0 mm (0.551 in.)
GENERATOR (w/ Dual VVT-i) 
Generator brush holder assembly
Standard exposed length
9.5 to 11.5 mm (0.374 to 0.453 in.)
Minimum exposed length
4.5 mm (0.177 in.)
Generator rotor assembly
Standard resistance
Slip ring - Slip ring
1.55 to 1.95 at 20°C (68°F)
Slip ring - Rotor core
10 kΩ higher
Slip ring diameter
Standard diameter
14.2 to 14.4 mm (0.559 to 0.567 in.)
Minimum diameter
14.0 mm (0.551 in.)
BATTERY THERMOMETER SENSOR (w/o Dual VVT-i) 
Battery thermometer sensor
Standard resistance
1.91 to 2.05 kΩ at 24 to 26°C (75 to 79°F)
BATTERY CURRENT SENSOR (w/ Dual VVT-i) 
Battery current sensor
Standard resistance
2 (VC5) - 4 (E2)
0.1 to 10 kΩ
2 (VC5) - 3 (IB)
0.5 kΩ or less
3 (IB) - 4 (E2)
0.05 to 10 kΩ
Battery thermometer sensor
Standard resistance
1.5 to 2.5 kΩ
← SERVICE DATA (Oct 2014 – Dec 2014)TORQUE SPECIFICATIONS (Oct 2014 – Dec 2014) →