2014-2019 Hiace · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built from Jan 2015

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015

Air pump assembly: 
Connection
Specified Condition
AI System Operation ON
(soon after the cold engine starts)
10 to 40 A
AI System Operation OFF
(engine is idling)
Below 1 A
1 (APH+) - 3 (APH-)
3.6 to 17.6 Ω at -20°C (-4°F)
3.4 to 16.5 Ω at -10°C (14°F)
3.1 to 15.4 Ω at 0°C (32°F)
2.8 to 14.3 Ω at 10°C (50°F)
2.7 to 13.2 Ω at 20°C (68°F)
Air switching valve: 
Tester Connection
Specified Condition
1-2
4.5 to 5.5 Ω at 20°C (68°F)
Vacuum switching valve: 
Tester Connection
Specified Condition
1-2
26 to 30 Ω at 20°C (68°F)
1 - Body ground
10 MΩ or higher
2 - Body ground
Air fuel ratio sensor: 
Tester Connection
Specified Condition
1 (HA1A) - 2 (+B)
w/o Dual VVT-i
1.8 to 3.4 Ω at 20°C (68°F)
w/ Dual VVT-i
1.6 to 3.2 Ω at 20°C (68°F)
1 (HA1A) - 4 (A1A-)
10 kΩ or higher
Heated oxygen sensor: 
Tester Connection
Specified Condition
1 (HT1B) - 2 (+B)
w/o Dual VVT-i
w/ Secondary Air Injection System
11 to 16 Ω at 20°C (68°F)
1 (HT1A) - 2 (+B)
w/o Dual VVT-i
w/o Secondary Air Injection System
11 to 16 Ω at 20°C (68°F)
1 (HT1B) - 2 (+B)
w/ Dual VVT-i
5.9 to 7.3 Ω at 20°C (68°F)
1 (HT1B) - 4 (E1)
w/ Secondary Air Injection System
10 kΩ or higher
1 (HT1B) - 4 (E1)
w/ Dual VVT-i
10 kΩ or higher
1 (HT1A) - 4 (E1)
w/o Secondary Air Injection System
10 kΩ or higher
← SERVICE DATA (Oct 2014 – Dec 2014)TORQUE SPECIFICATIONS (Oct 2014 – Dec 2014) →