2014-2019 Hiace · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built from Oct 2014

TURBOCHARGER PRESSURE 
Condition
Specified Condition
Engine speed (approximately 4600 rpm)
58.5 to 78.9 kPa (0.60 to 0.80 kgf*cm2, 8.5 to 11.4 psi)
MANIFOLD ABSOLUTE PRESSURE SENSOR 
Tester Connection
Condition
Specified Condition
D51-3 (VC) - D51-1 (E)
Ignition switch ON
4.75 to 5.25 V
D51-2 (PIM) - D51-1 (E)
Ignition switch ON
3.0 to 5.0 V
TURBOCHARGER 
Condition
Specified Condition
Maximum axial play of turbine shaft
0.08 mm (0.0031 in.)
Maximum radial play of turbine shaft
0.110 mm (0.0043 in.)
Actuator and waste gate valve operation
Turbocharger sub-assembly
(Part No.)
Valve opening pressure
17201-30070
130 kPa (1.32 kgf*cm2, 18.8 psi)
17201-30080
119 kPa (1.21 kgf*cm2, 17.2 psi)
← TORQUE SPECIFICATIONS (from Jan 2017)TORQUE SPECIFICATIONS (from Oct 2014) →