2014-2019 Hiace · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built from Oct 2014

Oil pressure
at idle speed
29 kPa (0.3 kgf/cm2, 4.2 psi) or more
at 3,000 rpm
245kPa (2.5 kgf/cm2, 36 psi) or more
Engine oil capacity
Drain and refill with oil filter change
6.5 liters (6.9 US qts, 5.7 Imp.qts)
Drain and refill without oil filter change
6.3 liters (6.7 US qts, 5.5 Imp.qts)
Dry fill
7.2 liters (7.6 US qts, 6.3 Imp.qts)
Oil pressure switch
Engine idling
Below 1 Ω
Engine stopped
10 kΩ or higher
Oil pump
Tip clearance
Standard
0.060 to 0.160 mm (0.0024 to 0.0063 in.)
Maximum
0.21 mm (0.0083 in.)
Body clearance
Standard
0.100 to 0.170 mm (0.0039 to 0.0066 in.)
Maximum
0.20 mm (0.0079 in.)
Side clearance
Standard
0.030 to 0.090 mm (0.0012to 0.0036 in.)
Maximum
0.15 mm (0.0059 in.)
OIL LEVEL SENSOR 
Tester Connection
Condition
Specified Condition
D12-1 - D12-2
Float position: top
Below 1 Ω
D12-1 - D12-2
Float position: bottom
10 kΩ or higher
← TORQUE SPECIFICATIONS (from Jan 2017)TORQUE SPECIFICATIONS (from Oct 2014) →