2014-2019 Hiace · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built Oct 2014 – Dec 2014

Versions by build date: Oct 2014 – Dec 2014 from Jan 2015

Oil pressure
at idle
29 kPa (0.3 kgf/cm2, 4.2 psi) or more
Engine oil pressure switch assembly
Engine idling
Below 1 Ω
Engine stopped
10 kΩ or higher
Engine oil level sensor
Float position: top
Below 1 Ω
Float position: bottom
10 kΩ or higher
Oil pump
at 3,000 rpm
160 to 490 kPa (1.6 to 5.0 kgf/cm2, 4.2 to 71 psi) or more
Oil pump
Tip clearance
Standard:
0.040 to 0.160 mm (0.0016 to 0.0063 in.)
Maximum:
0.26 mm (0.0102 in.)
Oil pump
Side clearance
Standard:
0.025 to 0.075 mm (0.0010 to 0.0030 in.)
Maximum:
0.130 mm (0.0051 in.)
Oil pump
Body clearance
Standard:
0.025 to 0.325 mm (0.0010 to 0.0128 in.)
Maximum:
0.130 mm (0.0167 in.)
Engine oil capacity
Drain and refill with oil filter change
5.5 liters (5.8 US qts, 4.8 Imp.qts
Drain and refill without oil filter change
5.0 liters (5.3 US qts, 4.4 Imp.qts
Dry fill
6.3 liters (6.7 US qts, 5.5 Imp.qts
← TORQUE SPECIFICATIONS (from Jan 2015)SERVICE DATA (from Jan 2015) →