2014-2019 Hiace · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built from Oct 2014

STANDARD OIL PRESSURE 
Condition
Specified Condition
Idle
29 kPa (0.3 kgf/cm2, 4.3 psi) or more
3000 rpm
294 to 539 kPa (3.0 to 5.5 kgf/cm2, 43 to 78 psi)
OIL PRESSURE SWITCH 
Tester Connection
Condition
Specified Condition
1 - Body ground
Engine idling
Below 1 Ω
Engine stopped
10 kΩ or higher
OIL LEVEL SENSOR 
Tester Connection
Condition
Specified Condition
D12 - 1 - D12 - 2
Float position: top
Below 1 Ω
Float position: bottom
10 kΩ or higher
OIL PUMP 
Tip clearance
Standard
0.110 to 0.240 mm (0.0043 to 0.0094 in.)
Maximum
0.30 mm (0.0118 in.)
Body clearance
Standard
0.144 to 0.219 mm (0.0057 to 0.0086 in.)
Maximum
0.40 mm (0.0157 in.)
Side clearance
Standard
0.035 to 0.085 mm (0.0014 to 0.0033 in.)
Maximum
0.15 mm (0.0059 in.)
← TORQUE SPECIFICATIONS (from Oct 2014)TORQUE SPECIFICATIONS (from Oct 2014) →