2014-2019 Hiace · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built from Oct 2014

Engine oil pressure
w/ DPF
Idle
50 kPa (0.5 kgf/cm2, 7.3 psi) or higher
2500 rpm
200 kPa (2.0 kgf/cm2, 29 psi) or higher
3000 rpm
250 kPa (2.5 kgf/cm2, 36 psi) or higher
w/o DPF
Idle
29 kPa (0.3 kgf/cm2, 4.2 psi) or higher
3000 rpm
245 kPa (2.5 kgf/cm2, 33 psi) or higher
Oil pressure switch
Engine idling
Below 1 Ω
Engine stopped
10 kΩ or higher
Oil pump
Standard tip clearance
0.06 to 0.16 mm (0.00236 to 0.00630 in.)
Maximum tip clearance
0.21 mm (0.00827 in.)
Standard body clearance
0.10 to 0.17 mm (0.00394 to 0.00669 in.)
Maximum body clearance
0.2 mm (0.00787 in.)
Standard side clearance
0.03 to 0.09 mm (0.00118 to 0.00354 in.)
Maximum side clearance
0.15 mm (0.00591 in.)
OIL PRESSURE SWITCHING VALVE 
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
13 to 17 Ω
OIL LEVEL SENSOR 
Tester Connection
Condition
Specified Condition
D12-1 - D12-2
Float position: top
Below 1 Ω
D12-1 - D12-2
Float position: bottom
10 kΩ or higher
← TORQUE SPECIFICATIONS (from Jan 2015)TORQUE SPECIFICATIONS (from Oct 2014) →