2014-2019 Hiace · Service Manual CRUISE CONTROL SYSTEM

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT CRUISE CONTROL MAIN SWITCH

  1. Measure the resistance according to the value(s) in the table below.

    E155225E05

    Text in Illustration 
    *a
    Component without harness connected
    (Cruise Control Main Switch)
    -
    -

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 3
    +RES
    235 to 245 Ω
    1 - 3
    -SET
    620 to 640 Ω
    1 - 3
    CANCEL
    1510 to 1570 Ω
    1 - 3
    Main switch off
    1 MΩ or higher
    1 - 3
    Main switch on
    Below 2.5 Ω

    If the result is not as specified, replace the cruise control main switch.

← REMOVAL (from Jan 2017)INSTALLATION (Oct 2014 – Dec 2014) →