P0630 VIN not Programmed or Mismatch - ECM / PCM
Diagnostic trouble codes · Vehicles built Apr 2016 – Dec 2016
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Nov 2015 Dec 2015 – Mar 2016 Apr 2016 – Dec 2016 Jan 2017 – Nov 2017 from Dec 2017
DESCRIPTION
DTC P0630 is stored when the Vehicle Identification Number (VIN) is not stored in the ECM, or the input VIN is incorrect. The VIN is input with the intelligent tester.| DTC No. |
DTC Detection Condition |
Trouble Area |
| P0630 |
Either condition is met (1 trip detection logic):
|
ECM |
INSPECTION PROCEDURE
| 1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0630) |
Connect an intelligent tester to the DLC3.
Turn the ignition switch to ON and turn the tester on.
Enter the following menus: Powertrain / Engine and ECT / DTC.
Read DTCs.
- Result:
Result
Proceed to
P0630
A
P0630 and other DTCs
B
- NOTICE:
- If P0630 is stored, the VIN must be input to the ECM using the intelligent tester. However, DTCs are cleared automatically by the tester when the VIN is input. If DTCs other than P0630 are output, troubleshoot those DTCs first.
|
|
||||
| A | |
| 2. INPUT VIN WITH INTELLIGENT TESTER |
Refer to the Registration (Click here).
| NEXT | ||
| ||
