P0299 Turbo / Super Charger Underboost
Diagnostic trouble codes · Vehicles built Dec 2015 – Mar 2016
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Nov 2015 Dec 2015 – Mar 2016 Apr 2016 – Dec 2016 from Jan 2017
DESCRIPTION
- HINT:
- Refer to DTC P0046 (Click here).
| DTC Detection Drive Pattern |
DTC Detection Condition |
Trouble Area |
| Accelerate vehicle with accelerator depressed halfway or more starting from a speed of 120 km/h (75 mph) or more for 2 minutes (make sure gear is fixed and does not change) |
The pressure is 55 kPa below the Target Booster Pressure for 80 seconds at an engine speed of 2800 to 4400 rpm (2 trip detection logic). |
|
| DTC No. |
Data List |
| P0299 |
|
- HINT:
- If DTC P0299 is stored due to the variable nozzle being stuck open, the following symptoms may appear:
- Lack of power
- Vehicle surge or hesitation under light or medium load
- If DTC P0299 is stored due to the variable nozzle being stuck open, the following symptoms may appear:
INSPECTION PROCEDURE
- NOTICE:
- After replacing the ECM, the new ECM needs registration (Click here) and initialization (Click here).
- HINT:
- Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.
- Comparison of the data list items manifold absolute pressure and target booster pressure during acceleration under medium to high engine speeds can be used to determine the state of the problem.
- Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.
| 1. CHECK FOR ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0299) |
Connect the GTS to the DLC3.
Turn the ignition switch to ON and turn the GTS on.
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Read the DTCs.
Result Result
Proceed to
P0299 is output
A
P0299 and other DTCs are output
B
|
|
||||
| A | |
| 2. CHECK FREEZE FRAME DATA (COMMON RAIL PRESSURE AND TARGET COMMON RAIL PRESSURE) |
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Record the stored DTCs and freeze frame data.
Result Result
Proceed to
Difference between Common Rail Pressure and Target Common Rail Pressure of freeze frame data is 20000 kPa or more
A
Except above
B
|
|
||||
| A | ||
| ||
