2014-2019 Hiace · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Oct 2014


1. REMOVE TRANSMITTER BATTERY HOUSING COVER

NOTICE:
Take extra care when handling these precision electronic components.

  1. B362726E01
    Slide the release hook knob and pull the emergency key in the order indicated in the illustration.

  1. B362727E01
    Insert a precision screwdriver tip into the gap, and turn the screwdriver to detach the transmitter housing cover.

    NOTICE:
    Do not use excessive force when prying apart the transmitter housing cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape

  1. B362728
    Remove the transmitter battery housing cover.


2. REMOVE TRANSMITTER BATTERY

  1. B362729E01
    Insert a precision screwdriver into the gap, and gently remove the transmitter battery (lithium battery: CR2032).

    NOTICE:
    1. Do not push the terminals with your finger.
    2. Do not forcibly pry up the transmitter battery. The terminals may be damaged.
    3. Do not touch the transmitter battery with wet hands. Water may cause rust.
    4. Do not touch or move any components inside the transmitter. Doing so may interfere with proper operation.
    5. When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape

← COMPONENTS (from Oct 2014)INSPECTION (from Oct 2014) →