2014-2019 Hiace · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Oct 2014


INSPECT POWER SLIDE DOOR MAIN SWITCH

  1. B140912E03
    Check the resistance.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      9 - 6
      Switch ON
      Below 1 Ω
      9 - 6
      Switch OFF
      10 kΩ or higher

      If the result is not as specified, replace the power slide door main switch.

  1. Check the illumination operation.

    1. Apply battery voltage to the power slide door main switch and check that the illumination comes on.

      Standard:
      Measurement Condition
      Specified Condition
      Battery positive (+) → Terminal 8
      Battery negative (-) → Terminal 7
      LED illuminates

      If the result is not as specified, replace the power slide door main switch.
      Text in Illustration 
      *a
      Component without harness connected
      (Power Slide Door Main Switch)
      *b
      Switch ON
      *c
      Switch OFF

← REMOVAL (from Jan 2017)INSTALLATION (Oct 2014 – Mar 2016) →