INSTALLATION
Removal / installation · Vehicles built Jan 2015 – Nov 2015
Versions by build date: Oct 2014 – Dec 2014 Jan 2015 – Nov 2015
| 1. INSTALL STARTER |
Temporarily install the starter assembly with the nut.
Temporarily install the wiring harness clamp bracket with the bolt.
Tighten the bolt and nut.
- Torque:
- 68 N*m{ 693 kgf*cm , 50 ft.*lbf }
Connect the starter wire with the nut.
- Torque:
- 21 N*m{ 215 kgf*cm , 16 ft.*lbf }
Connect the starter connector.
Close the terminal cap.
| 2. INSTALL ENGINE SIDE UNDER COVER RH |
| 3. INSTALL ENGINE SIDE UNDER COVER LH |
| 4. INSTALL NO. 2 ENGINE UNDER COVER |
Install the No. 2 engine under cover with the 6 bolts.
- Torque:
- 13 N*m{ 133 kgf*cm , 10 ft.*lbf }
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
